4.
START-UP
4.3.
PRIMING THE SUCTION HOSES
ATTENTION:
The machine has to be switched off.
– Open the door.
– Push Program buttons
• LEDs light up.
• In display
basic setting).
– Push Program button "1" repeatedly, until the display LED 3 lights
up.
– Close the door.
– Push Program button "1" again.
• In display
4.3.1. DETERGENT SUCTION HOSE
– Only with built in detergent pump.
– Push and hold programm "2".
• Hose will be filled.
• moving light display
– Releasing the button interrupts hose priming.
4.3.2. RINSE AID SUCTION HOSE
– Push Program button "1" again.
• In display
– Push and hold Program button "2".
• hose will be filled.
• moving light display
– Releasing the button interrupts hose priming.
– Termination of hose priming: Open door or do not press any button
for 30 seconds.
10
➁
simultaneously.
➇
, the LEDs 1 and 11−20 illuminate (dependent on
➇
LED 4 lights up.
➇
LEDs 15−18
➇
LED 5 lights up.
➇
, LEDs 15−18