Table of Contents
Advertisement
2.
TRANSPORTATION, STORAGE AND INSTALLATIONS
2.1.
TRANSPORTATION AND STORAGE
Folklift must be used during transportation and storage instead of vertical
loading, pay attention to upturn and prevention of break, moisture and
load. (See the marks on the package).
2.2.
LOCATION
– Rear wall clearance not required.
– Level machine by turning the feet.
– Distribute machine weight equally onto all feet
2.3.
ELECTRICAL CONNECTION
Must be carried out by an authorized technician according to
the local and national codes.
– The electrical supply shall comply with the name-plate data.
– Line fuses and cable cross section shall comply with the
requirements.
NOTE:
The machine with or without interlock function has different
working current. Please refer to the wiring diagram.
NOTE:
A cut-off device shall be provided to connect the supply cord
(isolating switch or accessible plug device).According to EN
60 335 the appliance must be connected to an equipotential
conductor. The connecting screw (
cable inlet.
6
) is located beside the
Hide quick links:
Advertisement
Table of Contents
