Olivetti d-Copia 18MF Service Manual page 73

Section Jam code
System 03
04
05
Paper feed 10
section
11
12
20
21
22
Fusing 40
section
Exit sec- 50
tion
DP 70
(option)
71
7A
7B
7F
Y104230-6
Description
No paper feed
Cover open JAM
Secondary paper feed
timeout
No paper feed from the
MP tray
No paper feed from the
cassette
No paper feed from the
optional cassette
Multiple sheets in the MP
tray
Multiple sheets in the
cassette
Multiple sheets in the op-
tional cassette
Misfeed in the fusing sec-
tion
Misfeed in the exit sec-
tion
No original feed
An original jam in the
original conveying sec-
tion
DP original cover or front
top cover open JAM
DP open JAM
Original remaining JAM
Sevice Manual
When the power switch is turned on or front top cover is
closed, the machine detects activation of the registration
sensor or the exit sensor.
A cover open state is detected during copying or printing.
When the machine waits for secondary paper feed, 15 s or
more have elapsed.
The registration sensor does not turn on within 1350 ms of
the MP feed clutch turning on; the clutch is then successively
turned off for 1 s and turned back on once, but the sensor
again fails to turn on within 1350 ms.
The registration sensor does not turn on within 1120 ms of
the feed clutch turning on; the clutch is then successively
turned off for 1 s and turned back on once, but the sensor
again fails to turn on within 1120 ms.
The registration sensor does not turn on within 1160 ms of
the feed clutch turning on; the clutch is then successively
turned off for 1 s and turned back on once, but the sensor
again fails to turn on within 1160 ms.
The registration sensor does not turn off within 5055 ms of
the registration clutch turning on (when paper is fed from the
MP tray).
The registration sensor does not turn off within 5055 ms of
the registration clutch turning on (when paper is fed from the
cassette).
The registration sensor does not turn off within 5055 ms of
the registration clutch turning on (when paper is fed from the
optional cassette).
The exit sensor does not turn on within 2765 ms of the regis-
tration clutch turning on.
The exit sensor does not turn off within 2765 ms of the regis-
tration sensor turning off.
When the power switch is turned on, the machine detects
activation of the DP timing switch.
The machine cannot detect activation of the DP timing switch
even after 1350 ms elapses since the start of primary paper
feed and cannot detect it at the same timing even after 5
times of retry.
The machine cannot detect deactivation of the DP timing
switch even after 4227 ms elapses since the start of second-
ary paper feed.
The machine detects deactivation of the DP timing switch
even after 909 ms elapses since the start of secondary paper
feed.
The machine detects opening of the DP original cover or the
front top cover while scanning originals.
The machine detects opening of the DP while scanning originals.
When the machine starts scanning of originals, the DP timing
switch is on.
Conditions
1-5-3