Connecting The Power Supply - Brother TD-4000 User Manual

11
STEP 1 Getting started

6 Connecting the Power Supply

Check that the electrical outlet is 220V-240V AC before plugging in the power cord.
•
Do not connect the TD-4000/4100N to the computer until directed to do so when
•
installing the printer driver.
Unplug the power cord from the electrical outlet after you have finished using the
•
TD-4000/4100N.
Do not pull the power cord when unplugging it from the electrical outlet. The wire in
•
the power cord may become damaged.
1
Check that the main power switch is turned
off.
2
Connect the power cord to the
TD-4000/4100N.
3
Plug the power cord into an electrical outlet.
4
Turn the main power switch on.
Off
The plug may differ by
country.