Brother TD-4000 User Manual page 22

19
STEP 2 Installing the software
For USB interface cable users
7
Follow the on-screen instructions for
installing the printer driver. When this
screen appears, confirm the printer is
powered on. When instructed, connect
the USB interface cable to your
computer and then to the printer, to finish
the printer driver installation.
•
It is important you do not connect the printer
to the computer until directed to do so.
•
Before connecting the USB interface cable, remove the caution label affixed
to the USB port of the machine.
8
Select a registration method and click [Next].
•
If you choose "Yes, display the page", you will go to the online user registration
page before finishing the installation (recommended).
•
If you choose "No, do not display the page", you will continue the installation.
9
When instructed to download the optional tools, select your choice
and click [Next].
•
If you choose "Yes, display the page", you will go to the Brother Solutions Center
website before finishing the installation (recommended).
Choose your region (eg. Europe), your country, your model and Downloads for
your model.
•
If you choose "No, do not display the page", you will continue the installation.
To download the optional tools later, you can find them on this website:
http://solutions.brother.com
Choose your region (eg. Europe), your country, your model and Downloads for
your model.
10
Click [Finish].
11
Start the software.
Click [Start] - [All Programs (Programs)] - [Brother P-touch] - [P-touch Editor 5.0] to
start P-touch Editor.
For details on software, see the "Software User's Guide" (PDF).
You can find the Software User's Guide (PDF) by clicking [Start] - [All Programs
(Programs)] - [Brother P-touch] - [Manuals] - [TD-4100N] - [Software User's Guide].