Ubee Interactive
Steps
To enable a closed network:
1. Access the pull down menu on Broadcast SSID.
2. Choose Off to enable a closed network, meaning the SSID is not visible to wireless
clients. Automatic Security Configuration is disabled.
Note: WPS must be disabled before Broadcast SSID can be turned to Off.
9.4
Using the Access Control Option
Use the Access Control option to configure which clients can access your wireless
network.
Steps
To configure client access:
1. Click Wireless from the main menu.
2. Click Access Control from the left side menu. Field descriptions are listed below the
screen example. This example shows the screen when the DVW32CB is in the
2.4GHz band.
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide • January 2015
Using the Access Control Option
81