Connecting A Wireless Device - Ubee DVW32CB Subscriber User Manual

Ubee Interactive
console (for example, log into the gaming server, play an online game, download
content).
Note
Refer to Troubleshooting the Installation on page 16
2.2.2

Connecting a Wireless Device

Use the following steps to connect a wireless device to the cable modem (for example, a
laptop computer).
Default values are shown in the steps below. Some regions may change default values
using the cable modem or XML configuration file.
Steps
To connect a wireless device:
1. Access the wireless networking feature on your wireless device, and view available
wireless networks.
 Windows Users: Double-click the Wireless Network Connection icon in the system
tray (lower-right side of the Windows desktop). Click View Wireless Networks.
 Mac Users: Click on the wireless icon (Airport) on the right side of the top menu
bar. All available wireless networks will appear in the drop-down menu.
2. The DVW32CB is shipped with a default SSID. The SSID is the name of the wireless
network broadcast from the device so that wireless clients can connect to it.
 Double-click your SSID in the wireless networks window. The default SSID is
"WIFI" plus the last 6 characters of the Cable RF MAC address for the 2.4GHz
radio. For the 5GHz radio, "-5G" is added.
 SSID examples:
 Notes: You can find the Cable RF MAC addresses on the device label. If the
subscriber changes the SSID, the device does not revert to this default SSID upon
any reset of the device, except in the case of a manual reset using the device's
Web UI. See
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide • January 2015
1. 2.4G radio with Cable RF MAC address C03896A0B366
2.4GHz SSID: WIFIA0B366
2. 5G radio with Cable RF MAC address C03896A0B366
5GHz SSID: WIFIA0B366-5G
Using the Account Option on page
Connecting Devices to the Network
for troubleshooting information.
26.
15