Drive The Digital Output - LevelOne FCS-3000 User Manual

0/1
ioupload
0/1
mdupload
0/1
seqop
1 ~ 99999
sinter
mail
smethod
ftp
0/1
suffix
0/1
resetdo
Example: Enable sequential send snapshot by every 1 second with email.
http://myserver/setup/app.vspx?method=set&exclude=1&eventop=0&seqop=1&
smethod=mail&sinter=1

Drive the digital output

Note: This request requires the privilege of I/O access control.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/setdo.cgi?do1=<state>[&do2=<state>]
[&do3=<state>][&do4=<state>][&return=<return page>]
Where state is H, L. H means NC (normal close) connected with COMMON and L
means NO (normal open) connected with COMMON. The number of DO dependents
on the server type.
parameter Value
<state>
do<num>
<return page>
return
detection condition matched
Enable/Disable upload
condition matched
Enable/Disable upload snapshot when motion
detection condition matched
Enable/Disable sequential operation
Interval of sequential snapshot in second
Send snapshot by e-mail
Send snapshot by ftp
Enable/Disable FTP put snapshots with date and
time suffix
Reset/No reset DO when click save button
description
H – NC connected with COMMON
L – NO connected with COMMON
Redirect to the page <return page> after the
71
snapshot when DI