Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LevelOne FCS-3062
Summary of Contents for LevelOne FCS-3062
- Page 1 FCS-3062 2-Megapixel Day/Night PoE Dome Network Camera User’s Manual H/W: V1.0...
- Page 2 Product name: FCS-3062 Release Date: 2013/12/17 Manual Revision: V1.0 Default Settings IP Address DHCP Username admin Password admin...
-
Page 3: Table Of Contents
Table of Contents Package Contents ......................1 Hardware ........................2 Device Appearance ....................2 LED Indicators ......................2 DI/DO Diagram ......................3 Hardware Reset ....................... 4 Hardware Installation ...................... 5 Camera Connection ...................... 10 System Requirements ....................11 Software Installation ..................... 12 Access to the Network Camera .................. - Page 4 E-mail Settings ....................50 Samba Settings ....................51 HTTP Settings ....................51 Digital Output (DO) ..................52 Audio Clip ....................... 53 Video Clip ....................... 54 SD card ........................55 Storage Management ..................55 Maintenance ......................56 Language ....................... 56 User Management ..................56 IP Filter ......................
-
Page 5: Package Contents
Package Contents FCS-3062 Power Adapter Quick Installation Guide CD Manual/Utility... -
Page 6: Hardware
Hardware Device Appearance... -
Page 7: Led Indicators
LED Indicators Function LED Behavior Description Power LED Continuous illumination Power on Power LED Unit Power off Link LED Continuous illumination (Orange) Link Link LED Blinking (Orange) Connecting DI/DO Diagram... -
Page 8: Hardware Reset
Hardware Reset Reset Button The Reset Button can be used to reboot the camera or restore it to factory default settings. If the camera experiences a problem, rebooting the camera may correct the problem. If the problem remains, please restore the camera to factory default settings and reinstall the software. -
Page 9: Hardware Installation
Hardware Installation a. Remove the dome cover: Unscrew the screws and remove the dome cover from the camera device. b. PoE, Power, DIDO, Audio Connection i. Insert the PoE, DIDO, and Audio cable through conduit hole A or B. - Page 10 Connect the PoE (1), DIDO (2), and Audio (3) Cables to their respective terminals. See below for more details regarding the DIDO and Audio connection. 1) Power over Ethernet (PoE) Connection 2) Power Adapter Connection Please refer to the definition of the terminal blocks below. It is also printed on the motherboard.
- Page 11 c. For wall installation: i. Chose the location on the wall to place the camera. ii. Drill four holes through the center of the four location holes on the sticker. iii. Hammer the four plastic anchors which are provided in the product package into the four location holes.
- Page 12 from the product package to tighten the four included screws clockwise through the four holes on each side of the device as shown below. The best place to mount the camera is into a ceiling stud. WARNING: Do not mount the camera on a soft material. The camera may fall and be damaged.
- Page 13 iii. Release the video adjustment screw and to adjust the lens direction. After completion, tighten the video adjustment screw. f. Complete the Installation a. Place the dome cover on the camera device and slowly turn it until it is in the desired position. b.
-
Page 14: Camera Connection
Camera Connection a. Basic Connection (Without PoE) b. Connect the camera device to the Ethernet hub using a RJ45 Ethernet cable. c. Connect the power adaptor to the camera device. b. Power over Ethernet (PoE) Connection a. Connect the camera to a PoE-enabled hub using a single Ethernet cable. -
Page 15: System Requirements
System Requirements Operating System: Microsoft Windows XP Home Edition SP2 Microsoft Windows XP Professional SP2 Computer: IBM PC/AT Compatible CPU: Pentium 3GHz or faster Memory: 1024 MB or more Monitor: 1024 x 768 pixels or more, 24-bit True color or better Network Interface: 10/100Mbps Network interface card must be installed Web Browser:... -
Page 16: Software Installation
Software Installation In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to the person who can configure the Network Camera and grant user access to the camera. After hardware connection checking, the users can run the Installation Wizard program included in the product CD-ROM to automatically search for the Network Camera in the Intranet. - Page 19 2. Do not check the box if user would like to check the hardware installation settings. Otherwise click “Skip the hardware installation” to skip the hardware connection checking, the program will automatically search for the Network Camera in the Intranet. Click “Start”...
- Page 20 3. Select the Network Camera from the survey list and enter the user name and password. The user name and password are assigned as “admin/admin”.
- Page 21 4. Setting the Network Camera IP address. User can either select simple mode or professional mode for network camera IP setting. If simple mode is selected, the easy configuration program will set up the connection automatically. If professional mode is selected, the user will need to configure the IP manually, The DHCP setting is recommended.
- Page 22 5. Please make sure the internet connection is ready then start to do the internet discovery, otherwise click “Skip” to finish the setting. The default domain name is MAC address; you can also register with your own name on-line. 6. After finish setting, the connection successful or fail showed. If connection failed, user can either try again or quit the installation.
- Page 23 continue or click “X” on the top right of the screen to finish the installation. Once installation is completed, the Administrator should proceed to the next section "Access to the Network Camera" for necessary checks and configurations.
-
Page 24: Access To The Network Camera
Access to the Network Camera Check Network Settings The Network Camera can be connected either before or immediately after software installation onto the Local Area Network. The Administrator should complete the network settings on the configuration page, including the correct subnet mask and IP address of gateway and DNS. -
Page 25: Authentication
Authentication After opening the Web browser and typing in the URL of the Network Camera, a dialogue window pops up to request a username and password. The user name and password for the Administrator are assigned as “admin/admin”. Installing plug-in For the initial access to the Network Camera in Windows, the web browser may prompt for permission to install a new plug-in for the Network Camera on the Internet Explorer. -
Page 26: Live View
Live View Live View is the default page that opens when accessing the camera. Live video is displayed directly in the browser window. Stream1~3 Channels The network camera offers simultaneous several streams for optimized quality and bandwidth. Go to Configuration → Camera/Video/Audio → Video to configure the codec compression and video resolution or refer to the Video configuration page. - Page 27 better video quality. The downside of using this protocol is that the quality of its real-time effect is less than that of the UDP protocol. UDP - This protocol allows for more real-time audio and video streams. However, network packets may be lost due to network burst traffic and images may be broken. Activate UDP connection time-sensitive responses are more important than video quality.
- Page 28 Motion Detection - Enable the motion detection alert function. Mute - Turn off the sound. Talk - To communicate through the camera using the computer MIC. Default – Reset to default view settings. NOTE 1. The <Camera Control Panel> functions have no effect on the recorded video. Whatever changes are made to the <Camera Control Panel>...
-
Page 29: Configuration
Configuration Click <Configuration> on the main page to change the camera settings pages. NOTE - Only Administrators can access the Configuration page. Camera/Video/Audio Camera... - Page 30 Profile – Up to five profiles can be created for different lighting environments. Day, night and sunset are default profiles and users can create up to two additional profiles. Select a profile from the drop-down menu or select different ones to change profile settings. Brightness - Drag the bar to adjust the image brightness level.
- Page 31 Profile Management: Profiles can be scheduled to change at scheduled times or under different lightening changes. Always - Select Always to use a single profile. Select the profile from the drop down menu. Day & Night - Select Day & Night to schedule two profiles for day and night. Select profiles from the drop down menu for the Day and Night Profiles.
- Page 32 Schedule – Select Schedule to schedule specific time periods for different profiles. Digital Inputs - Select Digital Input to have the profile management controlled by an external sensor. Select profiles from the drop down menu. Profiles will change according to different trigger voltage levels. Click Apply to apply settings or Cancel to cancel changes.
-
Page 33: Video
Video The Network Camera offers several separate streams for different viewing options. - Page 34 Stream 1 ~ 3 Video Codec - The Network Camera offers three choices of video codec standards for real-time viewing: H.264, MPEG-4 and MJPEG. Video Resolution - Select from the drop-down menu to choose the best resolution recording settings. Frame Rate - Select the frame rate from drop-down menu. When selecting from Video Codec option, the frame rate ranges from 1 to 30 fps.
- Page 35 Text To make a note about the camera, check “Enable” and select the display position from the drop-down menu. Enter a video description in the text box. NOTE - The video overlay will only take effect in stream 1. Click Apply to apply settings or Cancel to cancel changes. RTSP Server To utilize RTSP authentication, the user must first set a password for the camera.
-
Page 36: Audio
Audio The administrator can set up several streams for the camera for different viewing devices. The administrator can enable or disable the audio function on either stream. If audio enable is selected, select the Audio codec from the drop-down menu. Advanced Settings Camera Speaker –... -
Page 37: Privacy Mask Control
Privacy Mask Control The camera is equipped with a privacy feature which allows users to mask the whole or partially of the camera’s live view. Privacy Mask Control - Enable the Privacy Mask control to remotely disable live view and recording from the camera. Configure the privacy windows for up to three individual windows or for the full screen. -
Page 38: Network
Network IP Settings This section explains how to configure a wired network connection for the camera. There are several ways to setup the camera over the Internet: (1) obtain an available dynamic IP address assigned by a DHCP server, (2) use a static IP, or use PPPoE (Point-to-point over Ethernet). Select the desire setup mode from the IP settings drop-down menu. -
Page 39: Upnp
3. PPPoE (Point-to-point over Ethernet): Use this mode if connecting to the Internet through a DSL Line. NOTE - To utilize this feature, it requires an account provided by an Internet Service Provider. Enter the user name and password provided by the ISP. Click Apply to apply settings or Cancel to cancel changes. - Page 40 providers (1) DynDNSand (2) TZO NOTE - Before utilizing this function; please apply for a dynamic domain account from a DDNS provider. DynDNS – Enable the DynDNS to allow the camera to have a fixed host and domain name. Refer to the DynDNS website (www.dyndns.com) to apply for a dynamic domain account. When an account has been created, enter the username, password and hostname.
-
Page 41: Http/Https
HTTP/HTTPS HTTP – (Hypertext Transfer Protocol) - This protocol allows for TCP protocol quality without having to open specific ports for streaming. Users inside a firewall can utilize this protocol to allow streaming data through. HTTPS - (Hypertext Transfer Protocol over SSL) - This protocol allows authentication and encrypted communication over SSL (Secure Socket Layer). -
Page 42: Multicast
Multicast Multicast sends a video stream to the multicast group address and allows multiple clients to acquire the stream at the same time by requesting a copy from the multicast group address. Therefore, multicast can effectively save Internet bandwidth. The RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media. -
Page 43: Easylink
EasyLink The IP Camera is bundled with free Level1DNS service which allows users to assign a unique user name to their network camera’s IP address. There is no need to configure the router to open up ports or remember hard-to-memorize IP addresses. The default domain name is MAC address, you can also register your own name on-line but it have to check the available first. -
Page 44: Event
Event Event Settings When an event (such as unauthorized movement) occurs, the camera can be scheduled to perform certain actions. An Event Type is a set of parameters that defines these actions. This section describes how to configure the camera to perform certain actions when events occur. - Page 45 How to Set Up an Event Schedule Event Schedule describes how and when the camera performs certain actions. 1. Check “Enable” and enter a descriptive name for the event schedule. 2. Set Event Schedule to define when the event is activated by selecting from Always (24 hours), Schedule or Recurrence pattern.
- Page 46 i. A Scheduled Event can be programmed for certain times and day. ii. Click individual boxes to schedule specific times for the camera to detect events. - 42 -...
- Page 47 b. If Recurrence Pattern is selected, the following page will be displayed. An event schedule can be programmed to recur at different times according to the user’s needs. Select the days for the event schedule to occur. Select a start time and specify the duration. 3.
- Page 48 a. When <Send to Email> is selected, the following page will be shown: Sender - Enter the email address of the sender. iii. Recipient - Enter the email address of the recipient. To enter multiple recipients, separate each using a comma. - 44 -...
-
Page 49: Motion Detection
Sender’s Name – Enter the sender’s name that will appear in the recipient’s inbox. Subject - Enter the title of the email. 5. When complete, click Apply to save new event or Cancel to delete the event. The new event will appear on the event list. 6. - Page 50 Detection Setting – Use this setting to enable and define the motion detection windows. The user can defined up to three areas on the live view window for motion detection. Select <Window1>, <Window2>, or <Window3> to adjust the motion detection window. Check the box to enable the window.
-
Page 51: Digital Input (Di)
Adjust the “Threshold” to change the threshold level. The higher the threshold, the larger objects need to be to trigger an event. The chart below the Live View window indicates the activity level of the Motion Detection window. When motion is detected by the camera and exceeds the defined threshold, a red bar will appear. - Page 52 Users can schedule an event to be triggered if there is a change in the sound level of a monitored area. Audio detection can be used to measure change in the ambient voice. Select the sensitivity from the drop-down menu. Sensitivity - is used to adjust the sensitivity of the sound level from 10 - 100%.
-
Page 53: Notifications
Notifications Use the tools in this section to specify what type of notification will be sent when an event occurs. The camera can send buffered images to an FTP server, Samba, Email, or HTTP. FTP Settings File Transfer Protocol (FTP) is used as an application component to automatically transfer files for program internal functions. -
Page 54: E-Mail Settings
E-mail Settings Select “Primary Email Server” option from the Server Selection drop down menu to send media files to an email server when an event is triggered. SMTP Server - Enter the server host name of the email server. SMTP Port - Enter the port number of the email server; by default, the SMTP port is set to 25. Authentication - Select the authentication type from the drop-down menu. -
Page 55: Samba Settings
Samba Settings Select this option to send the media files via a network neighborhood when an event is triggered. Server Address - Enter the IP address of the Samba server. User Name - Enter the user name of the Samba server. Password - Enter the password of the Samba server. -
Page 56: Digital Output (Do)
http://ip_address/ notification.cgi?parameter ip_address – type the IP address or host name of the HTTP host. Parameter – type the notification parameter if necessary. Example URL - http://192.168.1.1/xxxx.cgi Message - name1=value1&name2=vlaue2 Result - http://192.168.1.1/xxxx.cgi? name1=value1&name2=vlaue2 https://192.168.1.1/notification.cgi?event=MD&camera=FB-100A Message - Enter the message notification that will be sent when an event is triggered. Enter the user name and password if necessary. -
Page 57: Audio Clip
Audio Clip Audio Recording – Audio clips can be recorded and played when an event occurs. Click Browse to import a file from a local hard drive or network disk. Select the file and click Import. NOTE – The camera can only play audio clips which are saved as .wav files with G.711 u-law encoding in 8000 Hz sampling rate. -
Page 58: Video Clip
Video Clip This function is used to determine when video clips will be recorded and stored after an event is triggered. Pre-alarm buffer - Images can be stored internally on the server from the time immediately preceding the trigger. Enter the desired length of time. Post-alarm buffer - Images can be stored internally on the server from the time immediately following the trigger. -
Page 59: Sd Card
SD card Storage Management Click Apply to apply settings or Cancel to cancel changes. - 55 -... -
Page 60: Maintenance
Maintenance Language Select the desired language from the drop-down list. Click Apply to apply settings or Cancel to cancel changes. User Management This section explains how to enable password protection and create multiple accounts. The administrator account name is “admin”, which is permanent and cannot be deleted. Click to create an account. -
Page 61: Ip Filter
Enter the new user’s name, password and confirm password. Administrators can add up to 10 user accounts. Select the privilege level for the new user account from the drop-down list. Privilege levels can be assigned as: Administrator - user has access to view and change the Configuration page. Users with administrator privilege can change other user’s access rights and delete user accounts. -
Page 62: Configuration
NOTE - Do not power off the camera or camera during the upgrade. Upgrade - Click Browse… and specify the firmware file. Click Upgrade. The camera will begin upgrading and will reboot automatically when the upgrade is finished. The following message will show during the firmware upgrading process. Configuration This feature allows the user to export/import the configuration files of the network camera. -
Page 63: Reset To Default
Reset to Default This section is used to restore the camera to default factory settings. Check the boxes to preserve the IP, Date and Time, or Language settings. Click Apply to restore the camera to default factory settings. Reboot This feature will reboot the camera. Click Apply to begin. A message will pop up asking “The device will reboot. -
Page 64: System
System System Log Log – Set up the camera to record a system log when an event is triggered. This page displays the system’s log in chronological order. The system log is stored in the camera’s buffer area and will be overwritten when the buffer area is full. Click Retrieve to retrieve the log or click Save to file to save the system log. -
Page 65: Date And Time
Date and Time Time Zone – Select the local time zone from drop-down menu. Manual – Manually enter the date and time. Clone from PC – The camera will sync with the time, date and time zone of the computer used to modify the camera settings. -
Page 66: Save File Folder
Save File Folder Recording folder path - The destination for saving the recording video files. Click Browse to specify the saving path. Snapshot folder path - The destination for saving the snapshot files. Click Browse to specify the saving path and select the format from the drop-down menu. Device Information System Information –... - Page 67 Network Settings –Displays the complete network settings information of the camera. Video/Audio Settings –Displays the complete video/audio settings information of the camera. - 63 -...