LevelOne FCS-3000 User Manual page 13

Day/night ip dome network camera

Hide thumbs Also See for FCS-3000:

Table of Contents

For the MAC address, please check the label on the bottom of the camera.

The IP addresses shown in the "Current IP Address" field reflect those on the local

network.

They may be from the DHCP server.

If there is no DHCP server, the

camera will try to find a free IP address (this takes from 15 second to 3 minutes,

depending on the LAN status). The method of finding IP address is seeking from

192.168.0.99, to 192.168.0.254. If any of the address inside this range is free, the

Network Camera will be assigned to this IP address, and its subnet mask would be

255.255.255.0. If none of the addresses is free, the Network Camera will try the

range from 192.168.0.2 to 192.168.0.98. After an IP address is assigned to the

camera, the "Activity" status LED blinks.

The LevelOne's new UPnP function will always assign an IP address for the Network

Camera. The Administrator can click on button "Link to selected device" to connect

the I.E. to the camera. If the camera is not on the IP installer list, click on the

"Search" button to search for the camera on the LAN.

Table of Contents