Table of Contents
Advertisement
91-5677-20-00.ATT1477.RO.qxd
1
@
TIME/SET
"Monday, 12:00 am, 2003"
"To change clock,
press Time Set"
2
@
TIME/SET
"Monday"
3
@
CHANGE
"Tuesday"
Press until correct day is spoken
4
@
TIME/SET
"12 am"
5
@
CHANGE
"1 am"
Press until correct hour is spoken
6
@
TIME/SET
"00"
7
@
CHANGE
"01"
Press until correct minute is spoken
8
@
TIME/SET
"2003"
9
@
CHANGE
"2004"
Press until correct year is spoken
10
@
TIME/SET
"Tuesday, 1:01 am, 2004"
1950/2/13
⁄U⁄¨ 07:21
Answering System Operation
Day and time announcements
To set day and time
Before playing each message, the answering system
announces the day and time the message was received.
Before using the answering system, you should follow
the steps at left to set the day and time, so messages
are dated correctly.
The system uses voice prompts to guide you. Each time
@
you press
advances by one. When you hear the correct setting,
@
press
TIME/SET
To check day and time
(Twice)
You can press
current day and time without changing it.
NOTE:
Press
(Twice)
digit at a time. Press and hold to advance by 10 digits at a time.
NOTE:
You can choose to set the time manually, or you can allow
it to be set automatically with incoming Caller ID information. The time will be
set automatically only if you subscribe to Caller ID service provided by your
local telephone company (see page 5).
(Twice)
(Twice)
29
Page 29
, the day, hour, minute or year
CHANGE
to move to the next setting.
@
at any time to hear the
TIME/SET
@
to advance the minute or year by one
CHANGE
Advertisement
Table of Contents
