Kodak i4x50 Series Scanner Setup Manual page 37

36
Counter — if you want to add a Counter to the print string, you can
enter one of the following options:
• Field Width: used to control the width of the document counter.
Values range from 1 to 9.
• Format — allows you to configure the format of the counter when the
width of the value is less than the field width (the examples indicate a
field width of 3 and the counter at 4). Options are:
- Display Leading Zeros (default): "004"
- Suppress Leading Zeros: "4"
- Compress Leading Zeros: " 4"
• Increment, Reset and Reset value are only for the Kodak i4850
Scanner.
- Increment: allows you to configure when the counter is
incremented.
• Every Sheet
• Patch Type T
• Patch Type 1
• Patch Type 2
• Patch Type 3
• Patch Type 6
- Reset: allows you to configure when the counter is reset.
• Never
• Patch Type T
• Patch Type 1
• Patch Type 2
• Patch Type 3
• Patch Type 6
- Reset value: allows you to select the value for the counter when
it is reset.
NOTES:
• Patch patterns in the i4850 Scanner are read vertically and they must
be in the first 2 inches of the page.
• When using the Increment option, every page will be printed and the
counter will be incremented on the page after the patch page.
A-61838/ISIS June 2015