Kodak i4x50 Series Scanner Setup Manual page 34

A-61838/ISIS June 2015
• Pause Scanning - leave paper in path: scanning will stop
immediately (i.e., making no attempt to clear the paper path) but the
scanning application will be waiting for additional images (i.e., stops
the feeder). Image(s) of the multifed document will not be generated.
Clear any documents from the paper path prior to resuming the scan
session. Scanning may be resumed by pressing the Start/Pause
button on the Operator Control Panel. Scanning may be stopped by
pressing the Stop button on the Operator Control Panel or via the
scanning application.
• Pause Scanning - leave paper at exit: scanning will stop and the
last portion of the multifed document will be held at the transport's
exit, but the scanning application will be waiting for additional images
(i.e.,stops the feeder). Image(s) of the multifed document will not be
generated. Clear any documents from the paper path prior to
resuming the scan session. Scanning may be resumed by pressing
the Start/Pause button on the Operator Control Panel. Scanning may
be stopped by pressing the Stop button on the Operator Control
Panel or via the scanning application.
• Interactive Multifeed Recovery: scanning will stop but the scanning
application will be waiting for additional images (i.e., stops the
feeder). Images of the multifed document will be displayed on your
computer. You can accept these images or rescan to replace them.
You can make your selection on your computer or the scanner. Send
the images to your application and resume scanning by selecting
Accept. Selecting Rescan will discard the images and scanning will
resume. Scanning may be stopped by selecting Stop.
NOTE: Put the multifed document(s) into the input elevator before
selecting Rescan.
Speaker icon — displays the Open dialog box allowing you to select
the desired tone (.wav file) for your alarm.
33