Wall Installation - AT&T 1412 User Manual

1412 2002.12.7 9:20 AM

Wall Installation

6
Page 6
1 Reverse the wedge under the base. Place your fingers in
the holes as shown and swing the top of the wedge down.
2 Connect the power cord and
place the cord as shown.
Use only the power cord
supplied with this pro d u c t .
If you need a re p l a c e m e n t ,
call 1 800 222–3111.
3 Connect the telephone line cord ( s ) .
If you have a two-line jack, use only the four-wire (RJ-14) line
cord. Connect the line cord from the wall jack to the jack
labeled on the base. Make sure the plugs snap firmly
L1/L1+L2
into place.
Standard
electrical
outlet
Jack
L1/L1+L2
Line 1/Line 2
Modular
telephone jack