Table of Contents
Advertisement
3-3 Cleaning the Heads Using the Cleaning Kit
4.
Reattach the covers and quit the manual-cleaning mode.
Side cover
Close the front cover.
Press
The sub power is switched off.
5.
Perform a printing test to verify the results of the procedure.
Perform a printing test to check the results.
Perform automatic cleaning several times as required.
50
Chapter 3 Maintenance and Adjustment
Screws
Hook
CLOSE MAINTE-
NANCE COVER
Screw
Screws
.
Attach the side cover.
Press
.
After finishing cleaning, the following screen appears.
Lower the loading lever and attach the maintenance cover.
Raise the loading lever.
Advertisement
Table of Contents
