1.
Change to the print-head manual-cleaning mode.
Remove any media from the platen.
MAINTENANCE
CLEANING
Screw
Screws
FINISHED
CLEANING
3-3 Cleaning the Heads Using the Cleaning Kit
Switch off the sub power.
Hold down
and switch on the sub power.
Press
to choose [CLEANING].
Press
.
Open the front cover.
OPEN MAINTENANCE
COVER
Lower the loading lever and remove the maintenance cover.
Raise the loading lever.
Close the front cover, then press
Preparations are complete when this screen appears.
Chapter 3 Maintenance and Adjustment
.
47