Table of Contents
Advertisement
2.
Align the media.
Position so that both edges of the media are aligned above the grit rollers, and move the pinch
rollers to position them above the grit rollers.
Position the left and right pinch rollers
over the edges of the media.
Symbols are present to
serve as guides for posi-
tioning the grit rollers.
The middle pinch rollers can be detached.
You can freely detach the middle pinch rollers. During use, vary the number used according to the width and compo-
sition of the media. For more information, refer to the page noted below.
p 72 "Changing the Number of Middle Pinch Rollers to Match the Media"
Secure the stopper in place in alignment with the width of the media.
Stopper
Grit-roller position
Place all pinch rollers
above grit rollers.
Stopper
2-2 Loading and Cutting Off Media
For the middle pinch rollers, choose positions that
are as evenly spaced as possible with respect to the
width of the media.
Be sure to place the right
edge of the media on these
pinch rollers.
Screw
Chapter 2 Operation
Screw
27
Advertisement
Table of Contents
