1-2 Part Names and Functions
Middle Pinch Rollers
These can be attached or
removed to match the type
of media in use.
Grit Rollers
These rollers feed out media
toward the front of the ma-
chine.
20
Chapter 1 Introduction
Pinch Rollers
These clamp the media
when the loading lever is
lowered.
Platen
This is the path over which
the media passes. A suction
fan that keeps the media
from coming loose and print
heater that helps fix the ink
are built in.
Cutter Protection
This protects the tip of the
blade during cutting.
Media Clamps
These keep the media from
coming loose and prevent
fuzz on the cut edge of the
media from touching the
print heads.
Knife Guide
The separating knife passes
through this when you per-
form media cutoff.
Print-head Carriage
The print heads are inside
this.
Cutting Carriage
The blade and the separat-
ing knife are inside here.
Apron
This has a built-in dryer to
speed up drying of the ink.