Combined Cargo Cover And Net - Mercedes-Benz 2016 GLE Operator's Manual

loads against slipping or tipping over, e.g. by
using tie downs, even if you are using the
cargo compartment cover.
!
When loading the vehicle, make sure that
you do not stack the load in the cargo com-
partment higher than the lower edge of the
side windows. Do not place heavy objects on
top of the cargo compartment cover.
A cargo compartment cover or a combined
cargo cover and net (cargo compartment cover
with cargo net) is installed, depending on equip-
ment, behind the rear bench seat backrest.
Extending/retracting the cargo com-
partment cover
To extend: pull the cargo compartment cover
X
back by grab handle : and clip it into retain-
ers ; on the left and right.
To retract: unhook the cargo compartment
X
cover from left-hand and right-hand retain-
ers ;.
Guide cargo compartment cover forwards by
X
grab handle : until it is completely rolled up.
Removing/installing the cargo com-
partment cover (without integrated
cargo net)
To remove: make sure that cargo compart-
X
ment cover : is rolled up.
Push end cap = of cargo compartment
X
cover : in the direction of the arrow on the
right or left-hand side.
Push cargo compartment cover : into oppo-
X
site anchorage ;.
Remove cargo compartment cover :.
X
To install: Place cargo compartment
X
cover : into anchorage ; on the right or
left-hand side.
Push in opposite end cap = of cargo com-
X
partment cover : in the direction of the
arrow and insert cargo compartment
cover : into opposite anchorage ;.
Removing/installing the combined
cargo cover and net (cargo compart-
ment cover with integrated cargo net)
You can install and remove the combined cargo
cover and net from the cargo compartment.
Stowage areas
Z
335