Air Flow - Mercedes-Benz 2016 GLE Operator's Manual

Operating the climate control systems
134
Problems with the "Cooling with air dehumidification" function
Problem
The indicator lamp in the
¿ or Á button
flashes three times or
remains off. The "Cool-
ing with air dehumidifi-
cation" function cannot
be switched on.
Setting climate control to automatic
General notes
In automatic mode, the set temperature is main-
tained automatically at a constant level. The
system automatically regulates the temperature
of the dispensed air, the airflow and the air dis-
tribution.
The "Cooling with air dehumidification" function
is activated automatically in automatic mode.
In the rear compartment, you can also switch
climate control for the rear seats to automatic
mode using the à button.
Automatic control
Turn the SmartKey to position 2 in the ignition
X
lock ( page 145).
Y
Set the desired temperature.
X
To activate: press the à button.
X
The indicator lamp in the à button lights
up. Automatic air distribution and airflow are
activated.
To switch to manual mode: press the _
X
button.
or
Press the I or K button.
X
The indicator lamp in the à button goes
out.
3-zone automatic climate control: when auto-
matic mode is activated, you can select a cli-
mate mode ( page 134).
Y
Possible causes/consequences and M Solutions
Cooling with air dehumidification has been deactivated due to a mal-
function.
Visit a qualified specialist workshop.
X
Adjusting the climate mode settings
You can select the following climate mode set-
tings in automatic mode:
FOCUS high airflow, slightly cooler setting
MEDIUM medium airflow, standard setting
DIFFUSE low airflow, slightly warmer and draft-
free setting
Turn the SmartKey to position 2 in the ignition
X
lock ( page 145).
Y
Press the à button.
X
Press the ñ button repeatedly until the
X
desired climate mode appears in the display.
Setting the temperature
Dual-zone automatic climate control
Different temperatures can be set for the driv-
er's and front-passenger sides.
Turn the SmartKey to position 2 in the ignition
X
lock ( page 145).
Y
To increase or decrease: turn control : or
X
B counter-clockwise or clockwise
( page 127).
Y
Only change the temperature setting in small
increments. Start at 72 ‡ (22 †).