Combined Cargo Cover And Net - Mercedes-Benz M-Class Operator's Manual

Removing/installing the cargo
compartment cover (without integrated
cargo net)
To remove: make sure that cargo
X
compartment cover : is rolled up.
Push end cap = of cargo compartment
X
cover : in the direction of the arrow on
the right or left-hand side.
Push cargo compartment cover : into
X
opposite anchorage ;.
Remove cargo compartment cover :.
X
To install: if installed, remove the
X
protective caps from the side panels of the
seat row in which the cargo compartment
cover is to be installed. Use a suitable
object here, e.g. a coin.
Install the protective caps to the side
X
panels of the other seat row.
Place cargo compartment cover : into
X
anchorage ; on the right or left-hand side.
Push in opposite end cap = of cargo
X
compartment cover : in the direction of
the arrow and insert cargo compartment
cover : into opposite anchorage ;.
Stowage areas
Removing/installing the combined
cargo cover and net (cargo
compartment cover with integrated
cargo net)
You can install and remove the combined
cargo cover and net from the cargo
compartment.
Make sure that the cargo net and the cargo
X
compartment cover are rolled up.
To remove: press button ;.
X
Swing the combined cargo cover and net in
X
the direction of the arrow.
First, detach the combined cargo cover and
X
net from left-hand catch : and then
remove it from right-hand fixture =.
To install: push the combined cargo cover
X
and net up to the stop into right-hand
fixture =.
Place the combined cargo cover and net
X
into the left-hand fixture and push it into
catch : until the combined cargo cover
and net engages audibly.
339
Z