Combined Cargo Cover And Net - Mercedes-Benz 2015 M-Class Operator's Manual

Removing/installing the cargo com-
partment cover (without integrated
cargo net)
To remove: make sure that cargo com-
X
partment cover : is rolled up.
Push end cap = of cargo compartment
X
cover : in the direction of the arrow on the
right or left-hand side.
Push cargo compartment cover : into
X
opposite anchorage ;.
Remove cargo compartment cover :.
X
To install: if installed, remove the protec-
X
tive caps from the side panels of the seat
row in which the cargo compartment cover
is to be installed. Use a suitable object
here, e.g. a coin.
Install the protective caps to the side pan-
X
els of the other seat row.
Place cargo compartment cover : into
X
anchorage ; on the right or left-hand side.
Push in opposite end cap = of cargo com-
X
partment cover : in the direction of the
arrow and insert cargo compartment
cover : into opposite anchorage ;.
Removing/installing the combined
cargo cover and net (cargo compart-
ment cover with integrated cargo net)
You can install and remove the combined
cargo cover and net from the cargo compart-
ment.
Make sure that the cargo net and the cargo
X
compartment cover are rolled up.
To remove: press button ;.
X
Swing the combined cargo cover and net in
X
the direction of the arrow.
First, detach the combined cargo cover and
X
net from left-hand catch : and then
remove it from right-hand fixture =.
To install: push the combined cargo cover
X
and net up to the stop into right-hand fix-
ture =.
Place the combined cargo cover and net
X
into the left-hand fixture and push it into
catch : until the combined cargo cover
and net engages audibly.
Make sure that red lock status indicator ?
X
is no longer visible. The combined cargo
Stowage areas
Z
341