Battery - Mercedes-Benz 2016 GLE Operator's Manual

Table of Contents

Advertisement

If manual gearshifting is deactivated, the auto-
matic transmission shifts:
into the drive program that was last selected,
R
and
into the driving mode that was last selected
R
If you change the drive program, the operating
mode that was last selected is stored for approx-
imately 60 seconds. After this time, the HYBRID
operating mode is automatically activated.
Operating the on-board computer
You can display the current operating condition
of the hybrid drive system in the multifunction
display and the multimedia system in the form of
an energy flow display (
In the multimedia system display, you can also
call up a graphic display of the fuel consumption
and generated electricity (
Menus and submenus
Selecting displays in the display of the
multimedia system
Press the Ø button on the multimedia sys-
X
tem.
The vehicle menu is displayed.
To select
Energy
flow: turn and press the
X
controller.
The energy flow is displayed.
or
To select Consumption: turn and press the
X
controller.
Fuel consumption and the generated electric
energy are displayed.
To exit the display: press the % button on
X
the controller.
Selecting the energy flow display in the
multifunction display
Press the = or ; button on the steering
X
wheel to select the
Trip
Use : or 9 to select
X
Confirm by pressing a on the steering
X
wheel.
The active components of the hybrid drive
system are highlighted in the energy flow dis-
play.
page 247).
Y
page 250).
Y
menu.
Energy
flow.
PLUG-IN HYBRID operation
Energy flow display
Overview
Internal combustion engine
:
Electric motor
;
High-voltage battery condition of charge
=
?
High-voltage battery
A
Energy flow
The active components of the hybrid drive sys-
tem are highlighted.
The energy flow is indicated by arrows. The
arrows have a different color depending on the
operating state.
Automatic engine switch-off
The engine and electric motor are switched off.
The arrows for the energy flow are not shown.
The condition of charge of the high-voltage bat-
tery is shown when the SmartKey is in position 2
in the ignition lock.
247
Z

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents