Operation - Mercedes-Benz 2016 GLE Operator's Manual

Features
344
Use only connector cables that are dry and
R
free of damage.
When the ignition is off, make sure that the
R
115 V power socket is dry.
Have the 115 V power socket checked or
R
replaced immediately at a qualified speci-
alized workshop if it is damaged or has been
pulled out of the trim.
Never plug the connector cable into a 115 V
R
power socket that is damaged or has been
pulled out of the trim.
G
DANGER
If you reach into the power socket or plug
inappropriate devices into the power socket,
you could receive an electric shock. There is a
risk of fatal injury.
Only connect appropriate devices to the
power socket.
!
Note that work and repairs on the 115 V
power socket should only be carried out by
qualified specialist personnel.
General notes
The 115 V power socket provides an alternating
voltage of 115 V so that small electronic devices
can be connected. These devices, such as
games consoles, chargers and laptops, must not
consume more than a maximum of 150 watts
altogether.
Requirements for operation of these devices:
the electronic device that you connect has a
R
suitable connector and conforms to stand-
ards specific to the country you are in.
the plug of the electronic device is plugged
R
correctly into 115 V power socket.
the maximum wattage of the device to be
R
connected must not exceed 150 watts.
the on-board power supply is within a permis-
R
sible voltage range.
the 12 V sockets in the rear compartment and
R
the cargo compartment are operational.
Using the 115 V power socket
To switch on: switch the ignition on.
X
Open flap =.
X
Insert the plug of the electronic device into
X
115 V power socket :.
Indicator lamp ; lights up.
To switch off: disconnect the plug from
X
115 V power socket :.
Ensure that you do not pull on the cord.