Display In The Multimedia System - Mercedes-Benz 2016 GLE Operator's Manual

Driving systems
222
if the camera lenses are dirty or covered
R
if the vehicle components in which the cam-
R
eras are installed are damaged. In this event,
have the camera position and setting checked
at a qualified specialist workshop
Do not use the 360° camera in this case. You
can otherwise injure others or cause damage to
objects or the vehicle.
Guide lines are always shown at road level.
The field of vision and other functions of the
camera system may be restricted due to addi-
tional accessories on the rear of the vehicle (e.g.
license plate holder, bicycle rack).
On vehicles with height-adjustable chassis,
depending on technical conditions, leaving the
standard height can result in:
inaccuracies in the guide lines
R
inaccuracies in the display of generated
R
images (top view)
Activation conditions
The 360° camera image can be displayed if:
your vehicle is equipped with a 360° camera
R
the SmartKey is in position 2 in the ignition
R
lock
the multimedia system is switched on
R
Switching on the 360° camera
Press the Ø button in the center console
X
for longer than two seconds.
Depending on whether position D or R is
engaged, the following is shown:
a split screen with top view and the image
R
from the front camera or
a split screen with top view and the image
R
from the rear view camera
or
Press the Ø button in the center console.
X
The vehicle menu is displayed.
Select 360° Camera
X
Depending on whether position D or R is
engaged, the following is shown:
a split screen with top view and the image
R
from the front camera or
a split screen with top view and the image
R
from the rear view camera
and press 7 to confirm.
Activating the 360° camera using
reverse gear
The 360° camera images can be automatically
displayed by engaging reverse gear.
Make sure that the SmartKey is in position 2
X
in the ignition lock.
Make sure that the Activation by R gear
X
function is selected in the multimedia system
(see the separate operating instructions).
To show the 360° camera image: engage
X
reverse gear.
The multimedia system shows the area
behind the vehicle in split-screen mode. You
see the top view of the vehicle and the image
from the rear view camera.
Selecting the split-screens or 180° view
Selecting split-screen view
To switch to the line with the vehicle icons:
X
slide 5 the controller.
To select one of the vehicle icons: turn 3
X
the controller.
To switch to 180°
X
troller to select 180° View
confirm.
i
The 180° View option is only available in the
following views:
Top view with picture from the rear view
R
camera
Top view with picture from the front camera
R
Displays in the multimedia system
Important safety notes
The camera system may show a distorted view
of obstacles, show them incorrectly or not at all.
Obstacles are not shown by the system in the
following locations:
under the front and rear bumpers
R
very close to the front and rear bumpers
R
in the area immediately above the tailgate
R
handle
very close to the exterior mirrors
R
in the transitional areas between the various
R
cameras in the virtual top view
View: turn 3 the con-
and press 7 to