Line Interface Module Mode - Mitel 5212 IP Phone User Manual

LINE INTERFACE MODULE MODE

Make A Call
To make a call using the Line Interface Module line:
1. Lift the handset.
2. Press the Line Interface Module key. ANALOG CALL appears on the
display.
3. Dial the number to make the call.
Notes:
When making external calls over the Line Interface Module line, a prefix
(e.g. 9) is not required.
If your phone's Line Interface Module key has the Privacy option enabled
and another phone is on a call using the Line Interface Module line (that
is, the Line Interface Module key is solid orange), you cannot access the
Line Interface Module line. The user of the other phone must first hang up
before you can access the Line Interface Module line. To determine
whether the Privacy option is enabled, contact your System Administrator.
Answer A Call
To answer a call using the Line Interface Module line:
1. Lift the handset.
2. Press the flashing Line Interface Module key. ANALOG CALL appears on
the display.
Answer a Waiting Call on the Line Interface Module Line
If you have subscribed to an analog call waiting service, you may use the
hookswitch or press
Module call. When you are on a Line Interface Module call and a waiting Line
Interface Module call arrives, you will hear a beep.
Note: This feature may not be supported in all regions.
(CANCEL) to answer a waiting Line Interface
-50-