Speed Call Keys - Mitel 5212 IP Phone User Manual

Speed Call Keys

You may use Speed Call Keys to make a call or to send a string of digits
during a call (press a Speed Call Key during a call to send a multi–digit
password, for instance).
To dial a stored Speed Call number:
1. Lift the handset.
2. Press a Speed Call key.
To store a Speed Call number:
1. Press ( SUPERKEY ).
2. Press # or the No softkey until "Personal Keys?" appears.
3. Press * or the Yes softkey.
4. Press a personal key that isn't a line key.
5. Press * or the Change softkey
6. On a 5224 IP Phone only, press the Yes softkey.
7. Do one of the following:
To enter a new number, dial the number (press
between digits to create a one–second pause during dialing; press
( HOLD ) more than once to lengthen the pause.)
To enter a trunk flash, press
Flash" for more information about the use of this feature.)
To enter the last number dialed, press
8. On a 5212 IP Phone only, press the personal key again.
9. Do one of the following:
To make the number private, press * or the Priv softkey
To keep the number visible, press # or the Save softkey.
0. Press ( SUPERKEY ).
( TRANS/CONF ). (See "Trunk
( REDIAL ).
-17-
( HOLD )