Mitel 5212 IP Phone User Manual page 40

To answer a call using Handsfree Answerback:
Phone state before
Page arrives
Phone is idle and MUTE
is flashing
You are on a handset or
headset call, and MUTE
is OFF
You are on a MUTED
handset/headset call,
OR, you are on a
Handsfree call
To end a Handsfree Answerback call:
Press either
Note : When the Handsfree Direct Page call ends, the MUTE key light
returns to the state it was in before the call was established.
To answer the Direct Page
1. Check that MUTE is OFF.
2. Listen for the paging party.
3. Begin speaking.
4. Lift the handset if you wish to switch from a Handsfree
call to a handset call.
1. Check that MUTE is flashing.
2. Press MUTE. The light turns ON solid, and you are now
speaking to the paging party and have muted your
handset/headset call.
3. Speak to the paging party. Press MUTE to alternate
between handset/headset and handsfree calls.
The party paging you receives a busy tone. Handsfree
Answerback does not interrupt your call.
( SPEAKER ) or ( CANCEL ).
-35-