Direct Paging - Mitel 5212 IP Phone User Manual

Direct Paging – Handsfree Answerback Enabled
When you receive a Direct Page, Handsfree Answerback automatically
establishes a Handsfree call on your phone after a single burst of tone.
Your administrator enables or disables Handsfree Answerback on your
phone. After your administrator enables Handsfree Answerback, you can
choose to turn it on or off directly from your phone.
To turn Handsfree Answerback on:
When your phone is idle, press
The MUTE key light flashes to indicate that Handsfree Answerback is ON.
When a Direct Page arrives, the MUTE key light turns OFF and a Handsfree
call is automatically established.
To turn Handsfree Answerback off:
Press the flashing
The MUTE key light turns OFF.
To respond to a Direct Page when Handsfree Answerback is OFF, see
"Direct Page – Handsfree Answerback Disabled" elsewhere in this guide.
Note: By default, Handsfree Answerback is turned OFF at your phone. If the
(MUTE) key is OFF when your set is idle, Handsfree Answerback is OFF.
(MUTE) once.
(MUTE) key once.
-34-