Administrator Tools; Changing Passwords - Mitel 5055 User Manual

Mitel user's guide telephone 5055

Hide thumbs Also See for 5055:

User manual (89 pages)

Table Of Contents

Table of Contents

5055 SIP Phone User Guide (Rev. A)

This section contains the following information on configuring the administrative settings of

the 5055 SIP Phone:

• Changing Passwords

• Setting Up User Profiles

• Creating/Modifying a SIP Account

• Modifying the Network Configuration

• Upgrading the Firmware of the SIP Phone

• Additional Settings

These settings are changed using the Web Configuration Tool or the SIP Phone Menu

Interface.

Note: You cannot change these settings while on a call.

Changing Passwords

The Administrator can change the password for all defined users using the Web

Configuration Tool or the SIP Phone Menu Interface.

Note: The Administrator password should be changed as soon as possible to prevent

unauthorized access to the Administrator functions of the SIP Phone.

Using the Web Configuration Tool

1. Access the Web Configuration Tool using the Administrator user name and password

(see The Web Configuration Tool on page 7).

2. Click Security Config.

3. Change the passwords as required (note: you cannot change user names using this

screen).

4. Click the Apply button. A confirmation screen is displayed.

5. Click the OK button. The SIP Phone is updated.

Using the SIP Phone Menu Interface

You must repeat this procedure for each password that needs to be changed.

1. Press the Menu key.

2. Press the >> softkey. "USERS?" is displayed.

3. Press the OK softkey.

4. Press the

softkey until "4.CHANGE PASSWORD?" is displayed, and press the OK

softkey.

5. Enter the Administrator user name, or the user name for the user profile whose password

you are changing, and press the Submit softkey.