Announce Only Mode - AT&T 1855 User Manual

ATT-1855CIB-d05.qxp
MSG#
Ao
"AO" (Announce Only) stops
flashing after an announcement
is recorded.
1
SET UP
Press and hold for 1 second
to enter feature menu.
"Selected
announcement is A"
2
SKIP/REPEAT
"Announce Only"
3
PLAY/STOP
Or
4/8/2005 5:39 PM Page 20
Answering System Operation

Announce Only mode

In Announce Only mode, callers hear an announcement
but cannot leave messages.This option is useful, for
example, to notify callers that you will be away for an
extended period and request that they call back after a
certain date.
To turn Announce Only on or off
Press and hold
announcement is A"
hear the option you want:
• A: Callers hear current outgoing announcement and
can leave messages.
• Announce Only: Callers hear current outgoing
announcement and cannot leave messages.
Press
PLAY/STOP
again to change other features (see page 21).
SET UP
To record your outgoing announcement
After turning on the Announce Only feature, follow the
procedure on page 19 to record your announcement.
If you do not record an announcement, incoming calls
will be answered after 10 rings, but callers will hear
Announcement"
20
until you hear
"Selected
SET UP
Then press
SKIP/REPEAT
to save your selection and exit, or press
and will not be able to leave a message.
until you
"No