Feature Setup - AT&T 1739 User Manual

Feature setup

Feature setup
1. To enter the feature setup mode, press and hold SETUP until the system
announces "Language is..."
2. Press SETUP repeatedly until you hear the desired feature.
3. When you hear the feature you want to modify, press
/REPEAT to choose the feature's setting.
MEMO
4. Press SETUP to save the setting and advance to the next setting.
- OR -
Press
PLAY
When any feature is on, the message window displays
When any feature is off, the message window displays
Feature summary
FEATURE
Language
Ring select
Remote
access code
/STOP to save the setting and exit feature setup.
SYSTEM
ANNOUNCEMENT
"Language is..."
"Number of rings is..."
"Remote access
code is..."
-
• You may choose English or Francais
(French) for the voice prompts used by
the system.
• During setup, the message window
displays the current language setting
(E for English or F for French).
• Choose the number of rings before
the system answers a call. You can
set it between 2 and 7 rings, toll
saver 2/4 or toll saver 4/6.
• When the toll saver is set as 2/4, the
system answers after 4 rings if there
are no new messages, or after 2 rings
if there are new messages. When the
toll saver is set as 4/6, the system
answers after 6 rings if there are
no new messages, or after 4 rings if
there are new messages.
• During setup, the message window
displays the number of rings (or 8
for toll saver 2/4, 9 for toll
saver 4/6).
• Change the remote access code to
any 3-digit number between 500
and 999.
• The remote access code is preset to
500. You can access many features
remotely from a touch-tone telephone.
• The 3 digits of the remote access
code are set separately. The system
will prompt you to set the second
and third digits after setting the first
digit. �ee Feature setup above.
2
/SKIP or
ANNC
.
.
OPTIONS