Updating The Firmware (Firm Update); Checking The Firmware Version (Version) - Yamaha Aventage RX-A1050 Owner's Manual

Updating the firmware (FIRM UPDATE)

DOCK SP IMP. - FIRM UPDATE
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
USB
IN OUT 1 OUT 2 2 3 4
ENHANCER SLEEP
HD 3
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from the Yamaha website. If the unit
is connected to the Internet, you can download the firmware via the network. For
details, refer to the information supplied with updates.
■
Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select "USB" or "NETWORK" and press INFO to
start firmware update.
Choices
USB Update the firmware using a USB memory device.
NETWORK Update the firmware via the network.
• If the unit detects newer firmware over the network, the corresponding message will be displayed after
ON SCREEN is pressed. In this case, you can also update the unit's firmware by following the procedure in
"Updating the unit's firmware via the network" (p.135).
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR

Checking the firmware version (VERSION)

DOCK SP IMP. - VERSION
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
IN OUT 1 OUT 2 2 3 4
ENHANCER SLEEP
HD 3
Check the version of firmware currently installed on the unit.
• You can also check the firmware version in "System" (p.130) in the "Information" menu.
• It may take a while until the firmware version is displayed.
134
En
MUTE VOLUME
ADAPTIVE DRC
x.xx
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR