Restoring The Default Settings (Initialize); Updating The Firmware (Firm Update); Checking The Firmware Version (Version) - Yamaha RX-A2010 Owner's Manual

Restoring the default settings (INITIALIZE)

SP IMP. - INITIALIZE
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
2 3 4 CANCEL
IN OUT 1 OUT 2
ENHANCER SLEEP
3
HD
Restores the default settings for the selected item.
Choices
VIDEO Restores the default settings for video configurations.
ALL Restores the default settings for this unit.
CANCEL Does not perform an initialization.

Updating the firmware (FIRM UPDATE)

New firmware will be released irregularly for the purpose of additional features or
product improvements. It can be downloaded from our website. If this unit is connected
to the Internet, you can download the firmware via the network. For details, refer to the
information supplied with updates.
DOCK SP IMP. - FIRM UPDATE
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
USB
IN OUT 1 OUT 2 2 3 4
ENHANCER SLEEP
HD 3
■
Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select "USB" or "NETWORK" and press INFO to start
firmware update.
Choices
USB Update the firmware using a USB memory device.
NETWORK Update the firmware via the network.
• If this unit detects a newer firmware over the network, the corresponding message will be displayed after
ON SCREEN is pressed. In this case, you can also update the firmware of this unit by following the
procedure in "Updating the firmware of this unit" (p.137).
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR

Checking the firmware version (VERSION)

Check the version of firmware currently installed on this unit.
SP IMP. - VERSION
DOCK
TAG
HD
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE
x.xx
2 3 4
IN OUT 1 OUT 2
ENHANCER SLEEP
HD 3
• You can also check the firmware version in "System" (p.124) in the "Information" menu.
MUTE VOLUME
ADAPTIVE DRC
PL L C R PR
SL SW1 SW SW2 SR
PL SBL SB SBR PR
127
En