Basic Speaker Configuration - Yamaha Aventage RX-A1050 Owner's Manual

1 2 3 4 5 6 7 8 9 10 11

Basic speaker configuration

■
Placing speakers in your room
Depending on the number of speakers, place the speakers and subwoofer in your
room. This section describes the representative speaker layout examples.
• To play back Dolby Atmos contents, apply a speaker system with a ★ mark.
• (About the number of channels) For example, "5.1.2" denotes "standard 5.1-channel plus 2 for overhead
speaker channels". For details on how to place overhead speakers (presence speakers), see "Presence
speaker layout" (p.19).
❑ 7.1+2-channel system [★5.1.2]
(using both surround back and front presence speakers)
This speaker system brings out the full performance of the unit and allows you to enjoy
a highly-natural 3-dimensional sound field with any contents.
• The surround back speakers and front presence speakers do not produce sounds simultaneously. The unit
automatically changes the speakers to be used, depending on the selected CINEMA DSP (p.60).
❑ 7.1-channel system [★5.1.2] (using front presence speakers)
This speaker system uses the front presence speakers to produce a natural
3-dimensional sound field, and also creates Virtual Surround Back Speaker (VSBS)
using the surround speakers to add a sense of depth to the rear sound field. This
system is suited for enjoying not only 5.1-channel but also for 7.1-channel contents.
❑ 7.1-channel system [★7.1.0] (using surround back speakers)
This speaker system creates Virtual Presence Speaker (VPS) using the front, center and
surround speakers to produce a 3-dimensional sound field, and also allows you to
enjoy extended surround sounds using the surround back speakers.
17
En