Setting Items For Motion Detection - Sony ipela SNC-RH124 User Manual

Hide thumbs Also See for ipela SNC-RH124:
Table of Contents

Advertisement

Notes
• If Automatic configuration is enabled in the Local
Area Network (LAN) settings of Internet Explorer, the
image may not be displayed. In that case, disable
Automatic configuration and set the Proxy server
manually. For the setting of the Proxy server, consult
your network administrator.
• When you install ActiveX control, you should be
logged in to the computer as Administrator.
• When you are using Windows XP Service Pack 2 or
later, or Windows Vista, the information bar or
"Security Warning" may appear as you click Motion
detection. For details, see "Installing ActiveX
Control" in "When using Windows XP Service Pack 2
or later" on page 8 or "Installing ActiveX Control" in
"When using Windows Vista" on page 11.

Setting items for motion detection

Use the settings tab to set the conditions for the motion
detection function while observing camera images. This
menu is the same as the settings menu displayed when
you click Detection on Alarm transmission on the
e-Mail (SMTP) menu, or on Alarm recording on the
Image memory menu.
Setting the Sensor input/Camera tampering detection/Motion detection/Audio detection — Event detection menu
Preview screen
This screen is for monitoring images and configuring
active/inactive windows.
Active window Inactive window
Note
The frames shown on the monitor screen are not
displayed on the image files sent or recorded with
motion detection.
Target of setting
Select the camera position subject to detection settings
and VMF settings from Current position or Preset.
If you select Items to configure, the Current Position
and Preset will be displayed. Selecting Preset will
display Restore preset.
Current position: Select this option to set the current
camera position as the subject of configuration.
Preset: Select this option to configure each preset.
Select a preset from the list and move the camera to
the preset position. The setting is enabled when the
camera has moved to the set preset position.
Current position
91

Advertisement

Table of Contents
loading

Table of Contents