Motion Detection Tab - Set The Motion Detection; Setting Items For Motion Detection - Sony Ipela SNC-CH115 User Manual

opened. To clear the detection status, click Clear
button.
OK/Cancel
See "Buttons common to every menu" on page 32.
Note
Activation of the camera tampering detection function
may be delayed in the following conditions.
– When Auto slow shutter in the Camera menu-
Picture tab is active.
– When Image 1 size is as follows in the Camera menu
Video codec tab (SNC-CH220/CH260/DH220/
DH220T/DH260)
1920 × 1440
1600 × 1200
1280 × 960
1280 × 1024
– When Cropping is set to On in the Camera menu
Video codec tab (SNC-CH220/CH260/DH220/
DH220T/DH260)
Motion detection tab — Set the
motion detection
Motion detection detects moving objects in the camera
image and outputs an alarm.
Notes
• Before actual use, perform an operation test and
confirm that the motion detection function works
correctly.
• Even when privacy masking is used, the motion
detection function operates based on the images
before masking is processed.
• The Motion detection menu may not be displayed
depending on the function settings. To display the
Motion detection menu, configure as follows.
System menu- Installation tab (page 36)
– Monitor out: Off. (SNC-CH115/CH120/CH160/
CH220/CH260/DH120/DH120T/DH160/DH220/
DH220T/DH260/EB520/EM520/EM521)
– Video Out: Off (SNC-ZB550/ZM550/ZM551)
Camera menu-Video codec tab (page 44)
– Letterbox: Off.
– Cropping: Off.
– SolidPTZ: Off.
– Codec of Image 2: Off.
When the Motion detection menu is
displayed for the first time
When you click Motion detection, "Security Warning"
is displayed.
When you click Yes, ActiveX control is installed and the
Motion detection menu is displayed.
Notes
• If Automatic configuration is enabled in the Local
Area Network (LAN) settings of Internet Explorer, the
image may not be displayed. In that case, disable
Automatic configuration and set the Proxy server
manually. For the setting of the Proxy server, consult
your network administrator.
• When you install ActiveX control, you should be
logged in to the computer as Administrator.
• When you are using Windows XP Service Pack 2 or
later, Windows Vista or Windows 7, the information
bar or "Security Warning" may appear as you click
Motion detection. For details, see "Installing ActiveX
Control" in "When using Windows XP Service Pack 2
or later" on page 8, "Installing ActiveX Control" in
"When using Windows Vista" on page 11, or
"Installing ActiveX Control" in "When using
Windows 7" on page 14.

Setting items for motion detection

Use the settings tab to set the conditions for the motion
detection function while observing camera images. This
menu is the same as the settings menu displayed when
you click Detection on Alarm transmission on the
e-Mail (SMTP) menu, or on the FTP client menu.
Click the desired item in the setting item list to set the
respective detection area.
Setting item list
Detection target
All PTZ position or Preset position
Setting the Sensor input/Camera tampering detection/Motion detection — Event detection Menu
Monitor screen
Setting area
79