Shadow Tour Tab - Setting A Shadow Tour - Sony ipela SNC-RH124 User Manual

Effective period
Select the period during which the tour in activated.
Always: The tour can be activated any time.
Schedule: The tour is activated according to the
schedule you have set.
Click Schedule, and the menu for the effective
period is displayed. ("Setting the Schedule —
Schedule Menu" on page 88.)
Note
You cannot set tours if the effective periods overlap each
other.
OK/Cancel
See "Buttons common to every menu" on page 31.
Shadow Tour Tab - Setting a
shadow tour
You can set a series of actions entered by a cursor or
joystick as a tour.
Up to four tours (Tour A to Tour D) can be set.
Preview screen
This screen is for monitoring images and configuring
shadow tour settings.
For details of each button, please refer to the Control bar
of the Plug-in free viewer (page 21).
Shadow tour
Select On to run shadow tour.
Resume time on inactivity
This item becomes active when Shadow tour is set to
On. If a pan/tilt/zoom operation or a preset position
action based on an alarm is performed during a Shadow
tour, the Shadow tour will pause. Here you can set
whether to resume the tour after pausing.
70
Saving the Camera Position and Action — Preset position Menu
On: Resume the Shadow tour from the position where it
paused.
Off: Tour action stays paused.
Tour A to Tour D
Configure the settings for each Shadow tour, from Tour
A to Tour D.
On: The tour operates.
Off: The tour does not operate.
Record
Begins recording Shadow tour.
Play
Runs Shadow tour preview.
Stop
Stops the operation.
Effective period
Select the effective period of the tour.
Always: Always active.
Schedule: Effective period can be specified by schedule
configuration.
Clicking Schedule will display a menu from which
you can specify the period.
OK/Cancel
See "Buttons common to every menu" on page 31.