Abnormal Sending Tab - Setting The Abnormal E-Mail Sending Mode; Sending Images To Ftp Server - Ftp Client Menu; Common Tab - Setting The Ftp Client Function - Sony ipela SNC-RH124 User Manual

Always: Periodical sending is always effective.
Schedule: You can specify the period during which
periodical sending is effective.
Click Schedule and the menu for the effective period
is displayed. ("Setting the Schedule — Schedule
Menu" on page 88)
OK/Cancel
See "Buttons common to every menu" on page 31.
Abnormal sending tab — Setting
the abnormal e-mail sending mode
Abnormal sending
Select On to use abnormal sending.
Alarm
Select the alarm to be linked with e-mail notification.
[Fan]: Gives an alarm when the built-in fan stops.
(SNT-EX154/EP154)
[Video loss]: Gives an alarm when video input is not
available.
Resume sending
Set whether to resume periodical sending.
When it is set to on, a mail is sent every hour.
Recipient e-mail address
Type the recipient e-mail address, using up to
64 characters.
Administrator e-mail address
Type the e-mail address of the camera administrator,
using up to 64 characters. This is used as the reply
address or the address for a system mail from the mail
server.
OK/Cancel
See "Buttons common to every menu" on page 31.
74
Sending Images to FTP Server — FTP client Menu
Sending Images to FTP
Server
— FTP client Menu
When you click FTP client
the FTP client menu appears.
Use this menu to set up for capturing and sending still
images to an FTP server. Using FTP client function, you
can send an image and audio file that has been shot and
recorded linked with the external sensor input or with
the built-in detection functions to an FTP server. An
image file can also be sent periodically.
The FTP client menu consists of three tabs: Common,
Alarm sending and Periodical sending.
Common Tab — Setting the FTP
client function
FTP client function
To activate the FTP client function, select On.
Note
The frame rate and operability on the main viewer may
be reduced while a file is being transmitted by the FTP
client function.
FTP server name
Type either the FTP server name to upload still images
using up to 64 characters, or the IP address of the FTP
server.
User name
Type the user name for the FTP server using up to 64
characters.
Password
Type the password for the FTP server using up to 64
characters.
Re-type password
To confirm the password, type the same characters as
you typed in the Password box.
in the Administrator menu,