Position Tour Tab - Setting A Position Tour; Group Preset Positions; Resume Time On Inactivity - Sony Ipela SNC-ER585 User Manual

1
Move the camera to the position to be saved, while
checking the image with the preview viewer.
2
Select a preset number for saving, and type the
preset name.
3
Click the Set button.
The camera position is saved.
Call
Click to move the camera to the preset position.
Clear Thumbnail
Click to delete the thumbnail of the sepecific preset
position.
Thumbnail
Checking this checkbox registers a thumbnail when you
register a preset position.
Select a radio button to determine whether to register the
current camera image as a thumbnail or to register with
a specified image.
To specify an image, click Browse. Then click Submit.
Notes
• JPEG format images can be used (maximum file size
approximately 50 KB).
• When you upgrade the firmware, the thumbnails of
specific preset positions are deleted.

Group preset positions

You can sort preset positions into groups.
The information of the preset positions registered in a
group can be viewed from the group tree screen. By
clicking the preset position in a group, the camera moves
to the preset position.
A preset position can be registered into a group by drag
and drop.
New Group
You can register a new group.
Rename
You can rename the group and preset positions.
Clear
You can delete the group and preset positions.
OK/Cancel
See "Buttons common to every menu" on page 35.
Note
The target items are settings of the Position at Alarm in
this tab.
70
Saving the Camera Position and Action — Preset position Menu
Position Tour Tab — Setting a
position tour
Up to 16 positions can be programmed, and the camera
moves to the programmed positions sequentially (Tour).
Up to five programs can be set as Tours A to E.
Preview screen
This screen is for monitoring images and configuring
preset tour settings.
For details of each button, please refer to the Control bar
of the Plug-in free viewer (page 25).
Tour
Select On to enable the tour function.

Resume time on inactivity

This item becomes active when Tour is set to On.
With this item, you can select whether you restart or stop
the tour after it has stopped by manual pan, tilt or zoom
operation or by camera movement to the preset position
triggered by an alarm.
On: Specify the wait time before the tour restarts,
between 5 and 3600 seconds. The tour restarts
automatically after the specified time has elapsed.
Off: The tour does not restart.
Tour A to Tour E
Configure Tour A to Tour E respectively.
Each tour setting consists of 5 items: On/Off,
Sequence, Speed, Stay time. Effective period.
Select the tour to configure from the drop-down list.
On: The tour operates.
Off: The tour does not operate.