Table of Contents
Advertisement
6. Insert the nozzle and hot water/steam spout on the con-
nection nozzle by pushing it upwards and turning it clock-
wise until it is attached.
14.
CUSTOMISING THE DRINKS
The aroma (when required) and quantity of the drinks can be
customised.
1. Make sure the profile for which you want to customise the
drink is active;
2. From the homepage, press
3. To access the customising screen, choose the drink you
want to customise;
4. "CHOOSE COFFEE AROMA": Select the required aroma by
pressing
or
5. "CUSTOMISING COFFEE QUANTITY, STOP TO SAVE": Prepa-
ration begins and the appliance displays the quantity
customising screen in the form of a vertical bar. The star
alongside the bar represents the current quantity;
6. When the quantity reaches the minimum quantity you can
set, "
STOP" is displayed.
7. When the required quantity is reached, press "
8. "SAVE NEW SETTINGS?": Press "YES" or "NO".
The appliance confirms if the values have been saved or not (de-
pending on the previous selection). Press "
The appliance goes back to the homepage.
Please note!
•
Cappuccino and milk-based coffees: the coffee aroma
is saved first, followed by the quantities of first milk, then
coffee;
•
Hot water: the appliance delivers hot water. Press "
STOP" to save the required quantity.
•
You can also customise the drinks by connecting with the
DeLonghi Coffee Link App.
15.
MEMORISING YOUR PERSONAL
PROFILE
The appliance allows you to memorise 6 different profiles, each
associated with a different icon.
The profile displays the drinks most frequently selected from
that profile and the aroma and quantity selections for each drink
are memorised.
To select your personal profile, from the homepage press "
PROFILE 1" (B11), then select another numbered profile.
To enter another profile, press the profile currently in use then
press another profile.
Please note!
(B1);
and press "
OK" ;
STOP".
OK".
•
"
GUEST" profile: when you select this profile, you can
deliver drinks with the default settings. The
is not active.
•
You can rename your personal profile by connecting with
the DeLonghi Coffee Link App.
16. CLEANING
16.1
Cleaning the machine
The following parts of the machine must be cleaned regularly:
-
the appliance's internal circuit;
-
coffee grounds container (A10);
-
drip tray (A14);
-
water tank (A16);
-
coffee spouts (A8);
-
pre-ground coffee funnel (A4);
-
infuser (A19), accessible after opening the infuser door
(A18);
-
milk container (D);
-
chocolate carafe (E);
-
hot water/steam connection nozzle (A9);
-
display (B).
Important!
•
Do not use solvents, abrasive detergents or alcohol to clean
the coffee machine. With De'Longhi superautomatic coffee
machines, you need not use chemical products to clean the
machine.
•
None of the components of the appliance can be washed in
a dishwasher with the exception of the milk container (D)
and chocolate carafe (E).
•
Do not use metal objects to remove encrustations or coffee
deposits as they could scratch metal or plastic surfaces.
16.2 Cleaning the machine's internal circuit
If the appliance is not used for more than 3/4 days, before using
it again, we strongly recommend switching it on and:
•
performing 2-3 rinse cycles by selecting the "Rinse" func-
tion (section "8.1 Rinsing
•
delivering hot water for a few seconds (section "12. Deliv-
ering hot water").
Please note!
After cleaning, it is normal for the grounds container (A10) to
contain water.
16.3 Cleaning the coffee grounds container
When "EMPTY GROUNDS CONTAINER" appears on the display
(B), the grounds container must be emptied and cleaned. The
18
function
";
Advertisement
Table of Contents
Troubleshooting
