DèLonghi ECAM 650.75 Instruction Manual page 22

PRESS OK TO START FILLING
PROCESS
OK
PRESS OK TO START CLEANING
PROCESS OR TURN MILK
FROTH ADJUSTMENT DIAL
OK
TURN DIAL TO <CLEAN> POSI-
TION TO START CLEANING
CLEAN
ESC
TURN THE MILK FROTH
ADJUSTMENT DIAL TO MILK
POSITION
DESCALING NEEDED PRESS
OK TO START (~40MIN)
ESC OK
The water circuit is empty
The milk container has been inserted with
the froth adjustment dial (D1) in the "CLEAN"
position.
Milk has been delivered recently and the tubes
inside the milk container must be cleaned (D).
The milk container has been inserted with
the froth adjustment dial (D1) in the "CLEAN"
position.
The machine must be descaled.
27
Press " OK" to deliver water from the spout
(C6) until it flows out normally.
If the problem persists, make sure the water
tank (A16) is fully inserted.
To proceed with the CLEAN function press "
OK", or turn the froth adjustment dial to one of
the milk positions.
Turn the froth adjustment dial (D1) to CLEAN
(fig. 20).
Turn the dial to the required froth position.
Press " OK" to start descaling or "
to descale later. The descaling procedure descri-
bed in section "17. Descaling" needs to be per-
formed as soon as possible.
ESC"