Opening The Case - Gateway 8400 System Manual

Opening the case

Important
To work on the internal components of the computer, you must open the
case. To do this, you must first unlock and open the bezel door, then remove
the two right side cover panels that permit access to the interior of the case.
Because the components inside your computer are extremely sensitive to static
electricity, make sure to follow the precautions at the beginning of this chapter
for avoiding static electricity damage.
Only qualified personnel should open the system for maintenance. If you are
qualified to maintain the system yourself, make sure you are properly
grounded before opening the system chassis.
Warning
All references to front, rear, left, or right on the computer
are based on the computer being in a normal, upright
position, as viewed from the front.
Avoid exposure to dangerous electrical voltages and
moving parts, by turning off your computer and unplugging
the power cord(s) and modem cable (if installed) before
removing the chassis cover.
Opening the case
17