Metabo PowerMaxx Li LC 60 Operating Instructions Manual page 10

17026810_0107 PowerMaxx_Li.book Seite 10 Mittwoch, 17. Januar 2007 10:03 10
ENGLISH
ENG
Do not expose battery packs to naked
flame!
Do not open battery packs!
Do not touch or short-circuit battery packs!
Remove the battery pack from the machine before
any adjustment or maintenance is carried out.
Before fitting the battery pack, make sure that the
machine is switched off.
Keep hands away from the rotating tool!
Remove chips and similar material only with the
machine at standstill.
Materials that generate dusts or vapours that may
be harmful to health (e.g. asbestos) must not be
processed.
Protect the charger from moisture.
Danger - electrical voltage!
Only use the charger indoors.
Keep children away from the battery charger and
the working area! Keep your battery charger out of
reach of children!
Pull out the mains plug immediately if the battery
charger starts to smoke or flames emerge!
5 Overview
See page 3 (please unfold).
PowerMaxx Li:
1 Protective cap
2 Adjusting sleeve (torque control, maximum
torque)
3 Slide-switch (1st/2nd gear)
4 Rotation selector switch (direction of rotation
setting, transporting safety device)
5 Trigger switch
6 Battery pack release
7 Battery pack
Charger:
8 Charging compartment
9 Warning display
10 Operation display
10
6 Special Product Features
Charger:
Automatic balancing of the individual battery cells
permits optimum utilisation of the available
capacity and, at the same time, lengthens the
service life of the battery pack.
7 Commissioning
Charger:
Before plugging in, check to see that the
rated mains voltage and mains
frequency, as stated on the rating label,
match with your power supply.
7.1 Self-test
Insert mains supply plug.
The warning display (9) and the operating display
(10) light up in succession for approx. 1 second.
8 Use of PowerMaxx Li
8.1 Battery pack
Charge the battery pack before use.
Removing battery pack: Press battery pack
release (6)
and take out battery pack (7).
Inserting battery pack:
(7)Insert battery pack until it engages.
8.2 Setting the direction of rotation, engag-
ing the transporting safety device
(switch-on lock)
Do not activate rotation selector switch
(4) unless the motor has completely
stopped!
Actuate the rotational direction switch (direction of
rotation setting, transporting safety device) (4).
See page 3 (please unfold).
R = Clockwise setting
L = Counter-clockwise setting
0 = Middle position: transportation safety
device (Switch-on lock) set