Ufr Ii Printer Driver; Specifications - Canon DU7-1178-000 Service Manual

1.1 Specifications

1.1.1 UFR II Printer Driver

The UFR II assigns print processing loads to the print driver and the print controller for high-speed, low-
cost outputs.
Advantages
- While the features are enhanced, the memory usage can be saved supporting both page and band descrip-
tions.
- Balancing the data processing loads of the driver and controller allows high-speed outputs.
Specification
UFR II
Data processing
Effective print
Supported operating systems
The UFR II print driver requires 5.0 mm of the top, bottom, left, and right margins.
-Even if Print with Upper Left of Sheet as Starting Point option is selected, marginal areas of the data for
a page are missing in some print results. To solve this problem, adjust the scaling so that the data fit into
the printable area and print the data again.
Non-default paper:
Custom Size Minimum
Custom Size Maximum
Long sheet Minimum
Long sheet Maximum
0mm Mode
Custom Size Minimum
Custom Size Maximum
Long sheet Minimum
Long sheet Maximum
600/1200dpi
main scanning:2.5mm
sub scanning:Top 4.5mm, Bottom 2.5mm
Windows 2000 Professional/Server/Advanced Server
Windows XP Home Edition/Professional Edition(32 bit)
Microsoft Windows XP Professional x64 Edition (64 bit)
Microsoft Windows Server 2003 (32 bit)
Microsoft Windows Server 2003 x64 Edition (64 bit)
Mac OS X v10.2.8-V10.4.2
Effective print area(mm)
Main scaning
90.00
287.00
90.00
287.00
Effective print area(mm)
Main scaning
95.00
292.00
95.00
292.00
T-1-1
T-1-2
T-1-3
UFR II
Sub scaning Main scaning
138.00
422.00
423.00
622.00
T-1-4
0mm Mode
Sub scaning Main scaning
141.00
425.00
426.00
623.00
End of Paper(mm)
Sub scaning
5.00 5.00
5.00 5.00
5.00 5.00
5.00 5.00
End of Paper(mm)
Sub scaning
Top 2.50
2.50
Bottom 2.50
Top 2.50
2.50
Bottom 2.50
Top 2.50
2.50
Bottom 2.50
Top 2.50
2.50
Bottom 2.50
Chapter 1
0010-7471
1-1