Pcl Font Handling; Ps Font Handling - Canon DU7-1178-000 Service Manual

Chapter 1

1.1.4 PCL FONT HANDLING

FONT HANDLING:
-PCL5e/5c
HP-GL/2 Mode
Texts are handled in the PCL mode, or in the HP-GL/2 mode if:
1. Characters are clipped.
2.Characters are rotated.
Supported typefaces include:
1. Standard
2. Italic
3. Bold
4. Bold Italic
Raster Mode
Use of a device font is determined by the driver setting.
If a device font is used, the Raster Mode will handle data the same as the HP-GL/2 Mode.
If not, the following restrictions will be imposed.
*GDI Raster Fonts unavailable 1 byte fonts such as Courier, MS Sans Serif, MS Serif, etc.
*GDI Vector Fonts available 1 byte fonts such as Modern, Roman, Script, etc.
*TrueType Fonts available 1 byte fonts such as Arial, Courier New, Symbol, Times New Roman, etc.
-PCL6
PCL6 controls the texts if:
1.Characters are enlarged or reduced.
2.Characters are rotated.
3.Characters are clipped.
NOTE:
GDI Vector Fonts and TrueType Fonts become available only after added to Windows.
Bercode Fonts:
PCL Printer will not support redident Barcode fonts.

1.1.5 PS FONT HANDLING

FONT HANDLING:
PS3
PostScript PDL boards support the following font types.
-Type 0, 1, 2, 3, 4, 5, 6, 9, 10, 11, 14, 32 and 42
-CIDFontType 0, 1, 2 and 4
1-6
0011-0472
0011-0473