Related Service Mode - Canon DU7-1178-000 Service Manual

Chapter 4
Restore Status
Messages
Device Error Previous restore result ended on an error on
the iR device side

4.4 Related Service Mode

4.4.1 Related Service Modes List
Following is an overview of the service modes related to the SEND function.
Preconditions:
- These service modes are found in COPIER>OPTION>BODY.
- All are Level 2 service modes.
- Service modes marked with an asterisk (*) are new service modes.
Item
I-Fax reception raw data print
I-Fax reception output line count
limit
No limitation on file size for I-Fax
serverless transmission.
Divided page transmission in I-Fax
simple mode
SMTP transmission port number
SMTP reception port number
POP3 port number
FTP transmission port number
CRAM-MD5 authentication
restrictions with SMTP / POP
AUTH authentication
NTLM authentication restrictions
with
SMTP / POP AUTH authentication
GSSAPI authentication restrictions
with SMTP / POP AUTH
authentication
PLAIN, LOGIN authentication
restrictions with SMTP POP
AUTH authentication when
communication packets are
encoded
LOGIN authentication restrictions
with SMTP POP AUTH
authentication
4-18
T-4-10
Setting Description
name
RAW- 0: Ordinary reception mode(default)
DATA 1: Received I-Fax content printed out as is (in order to judge
whether data are correct).
IFAX-LIM When large volume data (error mail, etc.) are received via I-Fax,
the output line count is restricted (default: 500).
NB: If the setting is 0, there is no restriction.
IFAX-SZL* 0: Enables Limitation on file size for serverless transmission.
1: Disables Limitation on file size for serverless transmission.
IFAX-PGD* 0: Does not allow divided page transmission in I-Fax simple mode
1: Allows divided page transmission in I-Fax simple mode
SMTPTXPN TCP port number used by SMTP transmission (default:25)
SMTPRXP TCP port number used by SMTP reception (default:25)
N
POP3N TCP port number used by POP (default:110)
FTPTXPN TCP port number used by FTP transmission (default:25)
NS-CMD5* 0: Permit CRAM-MD5 authentication when performing SMTP /
POP AUTH authentication. (Default)
1: Prohibit CRAM-MD5 authentication when performing SMTP
authentication.
NS- 0: Permit NTLM authentication when performing SMTP / POP
NTLM5* AUTH authentication. (Default)
1: Prohibit NTLM authentication when performing SMTP / POP
AUTH authentication.
NS-GSAPI* 0: Permit GSSAPI authentication when performing SMTP POP
AUTH authentication. (Default)
1: Prohibit GSSAPI authentication when performing SMTP POP
AUTH authentication.
NS- When communication packets are encoded,
PLNWS* 0: Permit PLAIN, LOGIN authentication when performing SMTP
POP AUTH authentication. (Default)
1: Prohibit PLAIN, LOGIN authentication when performing
SMTP POP AUTH authentication.
NS-LGN* 0: Permit LOGIN authentication when performing SMTP POP
AUTH authentication. (Default)
1: Prohibit LOGIN authentication when performing SMTP POP
AUTH authentication.
Error caused by the iR device
Device turned off during restore processing
Workspace memory allocation failure
Hard drive write failure
0008-4680