Miele G 879 SCVI Operating And Installation Instructions page 56

Dishwasher installation
The door panel is attached to the dish-
washer using the mounting bracket that
comes secured to the front of the ma-
chine.
To remove the bracket:
Loosen the bracket retaining screw
(black arrow) located on each side
of the machine door.
Pull the bracket up until the upper
section of the bracket disengages
from the locator pins, then remove
the bracket.
56
Opening the door after the bracket
has been removed:
Insert your finger into the T-shaped
hole in the front of the door and pull
until the latch releases.