Dishwasher Installation; Levelling The Countertop; For Countertops With Overhang - Miele G 879 SCVI Operating And Installation Instructions

Miele dishwasher user manual
Hide thumbs Also See for G 879 SCVI:
Table of Contents

Advertisement

Dishwasher installation

These fully integrated dishwashers are
specially designed for installation
under a continuous countertop.
A cabinet matching panel must be cus-
tom made for installation on the front of
the dishwasher.
To ensure stability, these dish-
washers should only be installed
under a continuous countertop
which is securely fastened to the
cabinet base units.
Dimensions:
1) For dishwasher height of 890 mm.
2) For dishwasher height of 840 mm.
Total height 840-890 mm; height adju-
stable by approx. 50 mm.

Dishwasher installation

1. Levelling the countertop.

Check that the countertop is sufficiently
level in both directions. If not, it should
be levelled.
2. For countertops with
overhang.
Countertop should be the same thick-
ness at the front and back to provide
proper contact with the top surface of
the dishwasher. For countertops with
overhang at the front, two pieces of
wood or a plate should be attached
from the underside as shown below. If
two pieces of wood are used, the
space between them may be filled with
rubber sponge, glued to the counter-
top, for better sound insulation.
51

Advertisement

Table of Contents
loading

Table of Contents