Programming The Water Hardness - Miele G 879 SCVI Operating And Installation Instructions

Water Softener
Programming the water hard-
ness
The Programme touch pads are used
to set the water hardness. Each pad
can be used alone (level 1) or in combi-
nation with the "Top Solo"pad (level 2)
to programme the hardness to the
valve determined using the Programm-
ing Table on the previous page.
For example, to set a level 1 value
(from 20 - 220 ppm (mg/l)), only a num-
bered Touch pad will have to be
pressed.
To programme a level 2 value (from 230
- 1260 ppm (mg/l)), both the "Top Solo"
pad and a numbered Touch pad will
have to pressed.
12
The " k" indicator lamp will flash
8
as long as you are in the programming
mode.